17
KEYPAD 1 KEYPAD 2 KEYPAD 3 KEYPAD 4 KEYPAD 5 KEYPAD 6
Loc Default Loc Default Loc Default Loc Default Loc Default Loc Default
Keypad Type LED LED SSD SSD LCD/VFD LCD/VFD
Keypad Attribute [23] H-1C [25] H-1C [27] H-1C [29] H-1C [31] H-1C [33] H-1E
Access Time (sec) [24] 5 [26] 5 [28] 5 [30] 5 [32] 5 [34] 5
Keypad Data Default Table
Keypad Attribute Table
Keypad Attributes 00 to FF
(see the Keypad
Attribute table.)
Access Time * 0 = Toggle ,
1 - 255 seconds
Primary Area 1 or 2 - determines which area the Control Station’s status indicator will
reflect and which area the Control Station will display area status for when it is idle.
Secondary Area Enabled - see the Programming Note 5 in Section 3.3.
‘A’ Key Enabled - defines if the Fire key is to be enabled at this Control Station
‘B’ Key Enabled - defines if the Police key is to be enabled at this Control Station.
‘C’ Key Enabled - defines if the Medical/Emergency key is to be enabled at this Control
Station.
Silent Exit Time - silences the exit alert at the Control Station.
Silent Entry Time - silences the entry alert at the Control Station. This does not affect
Pre-Alarm Warning Time.
Silent Trouble - silences the trouble conditions at the Control Station.
Time in seconds for an access output activated from this Control Station. Toggle access
feature allows the output to latch ON/OFF.
All access outputs assigned to this Control Station are affected when the access function
and a valid code is entered for this Control Station (see Section 3.2.5). It is not area
dependent. Typically used to activate electrically operated door strikes.
Item Valid Range Description
The following table refers to programming locations 23 through 34.
3.2.2 Keypad Data Descriptions
* This control is not a UL Listed Access Control System. The access feature should not be used in UL Listed installations.
Enter For: 0123456789ABCDEF
First Digit
All Features Below Disabled *
‘C’ Key Enabled ********
Silent Exit Time * * * * * * * *
Silent Entry Time **** ****
Silent Troubles ********
Second Digit
Primary Area 1 ****
Primary Area 2 ****
Primary Area 1, Secondary Area 2 ****
Primary Area 2, Secondary Area 1 ****
‘A’ Key Enabled **** ****
‘B’ Key Enabled ********
NOTE: If the First Digit entered is ‘1’, it must be entered as ‘01’. A = 10; B = 11; C = 12; D = 13; E = 14; F = 15
WWW.DIYALARMFORUM.COM
(64 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce